Huawei B535-932 as an access point or router without disabling the DHCP server

[AlchemyPinoy]

Here is a step-by-step guide on how to use the Huawei B535-932 as an access point or router without disabling the DHCP server:

1. First, connect your computer to the LAN port of the B535-932 router.
2. Open a web browser and enter "192.168.8.1" into the address bar. This will take you to the login page for the router's management panel.
3. Enter the administrator username and password for the router when prompted. If you have not changed these from the default settings, the username should be "admin" and the password should be "admin".
4. Once logged in, navigate to the "Network Settings" page.
5. On the "Network Settings" page, select the "LAN" tab.
6. Scroll down to the "DHCP Server" section and disable it by unchecking the box next to "Enable DHCP Server".
7. Click "Submit" to save your changes.
8. Next, go to the "WLAN" tab and select "WLAN Basic Configuration".
9. Here, you can change the wireless network name (SSID) and password to something of your choosing.
10. Under the "Security Mode" section, select WPA/WPA2-PSK and enter a strong password for the wireless network.
11. Once you have made these changes, click "Submit" to save them.
12. Finally, connect the B535-932 router to your existing network using an Ethernet cable. You can plug the cable into any of the LAN ports on the B535-932 router.

That's it! Your Huawei B535-932 router is now configured as an access point or router without disabling the DHCP server.